Our broad range of Powder Divider range includes a Coaxial Power Divider range and Tubular Powder divider range.
Coaxial Power Dividers
Models PD-2L, PD-4L, PD-2H and PD-4H
Coaxial power dividers are used to divide RF power into two or more equal components with minimum loss. By using power dividers, antennas may be arranged into collinear or stacked arrays to provide added gain or to modify the radiation patterns.
The input and output impedance is 50 Ohms, therefore the cables of the power divider must not be shortened. Likewise, any additional antenna connecting cables must all be the same length so that the antennas are kept in phase.
Primary weather sealing is provided for, but additional weather sealing will be necessary.
Specifications
PD-2L
PD-4L
PD-2H
PD-4H
Type coaxial
2 Way
4 Way
2 Way
4 Way
Bandwidth Range (MHz)
70 – 130 (see bandwidth)
130 – 500 (see bandwidth)
Bandwidth (MHz)
10
40
Power Rating (W)
750
Insertion Loss (dB)
0.2
Return Loss (dB & VSWR)
<-14dB 1.5:1
Input Connector Type
N Plug
Output Connector Type
N Jack*
Impedance input & output (Ohms)
50
*Other connectors are available to suit customer requirements.
Tubular Power Dividers
Models PD-2FM, PD-4FM, PD-2-900, PD-2-24 & PD-4-24
Tubular power dividers are used to divide RF power into two or more equal components with minimum loss. By using power dividers, antennas may be arranged into collinear or stacked arrays to provide added gain or to modify the radiation patterns.
The input and output impedance is 50 Ohms. Any additional antenna connecting cables
must all be the same length so that the antennas are kept in phase.
Primary weather sealing is provided for, but additional weather sealing will be necessary.
Above 500 MHz two way and four way power dividers are of the PCB type and are housed
in a black die-cast enclosure.
Specifications
PD-
-2FM / -4FM
-2-900
-2-24 / -4-24
Type Tubular/PCB
2 Way / 4 Way
2 Way
2 Way / 4 Way
Bandwidth Range (MHz)
(see bandwidth)
88 – 108
500 – 1000
2400 – 2500
Bandwidth (MHz)
15
100
100
Power Rating (W)
2000 (7/16 input)
250
5
Insertion Loss (dB)
0.2
Return Loss (dB & VSWR)
<-14dB 1.5:1
Impedance input & output (Ohms)
7/16 Din Jack*
N Jack*
*Other connectors are available to suit customer requirements.
