VHF End Fed Dipoles

Model DE-EF

The end-fed vertical half wave antenna is designed within the frequencies of 138 and 170 MHz to suit many applications and environmental conditions. They are ideal for paging or similar systems where a neat and rugged installation is required. These dipoles are easy to install and are pre-tuned with no assembly or tuning adjustments required.

The dipole is factory assembled and tuned before being fitted and sealed in a rugged fibreglass radome. The radome is fitted to a short section of anodised aluminium tube which is used to mount the antenna.

An RG58 coax tail exits through the end of the mounting tube and is 3 metres in length.

Model DE-EF
Frequency Range (MHz) 138-170
Bandwidth (MHz) 5
Gain (dBd) 0
Input Imepdance (Ohms) 50
Return Loss (dB & VSWR) <-14dB 1.5:1
Maximum Power (W) 25
Cable Type & Length RG58, 3 Metres
Connector Type Nil
Overall Height (m) 1.55
Projected Area (m2) 0.06
Weight (kg) 1.3
Mounting Tube Diameter (mm) 38
DE-EF Return Loss

Optional Extras

  • Mounting clamp - CLUV to mount to either a vertical or horizontal tube up to 50mm OD.
  • Longer coax tail - RG58 or low-loss RG58.
  • Connector

Click Here for a PDF Product Sheet