UHF Low Profile Aerials

The LPU-SH model is lightweight in construction, being fabricated from aluminium and housed in a white ABS plastic radome. Apart from mobile use, these units can be installed for data link outstations where an unobtrusive antenna is required.

The radiation pattern is similar to a 1/4 wave antenna, vertically polarised and omnidirectional when installed on a horizontal metal ground plane. They are factory tuned to the operating frequency, with the frequency stamped on the underside.

The LPU-C is a heavy duty design manufactured from cast aluminium and is suitable for bus/truck fleet operation or railway use. A hardwire 4m RG58 coax tail is fitted as standard. This antenna is supplied with an integral ground plane and finished with a powder coated paint finish. This antenna is supplied factory tuned.

Model LP-SH LPU-C
Frequency Range (MHz) 400-500 350-500
Bandwidth (MHz) 8 15
Gain (dBi) Unity
Input Imepdance (Ohms) 50
Cable Type & Length N/A 4m RG58
Connector Type BNC Jack None
Maximum Power (W) 50 100
Height (mm) 70 100
Length (mm) 250 300 (Ground Plane)
Width (mm) 100 300 (Ground Plane)
Weight (kg) 0.2 0.5
Mounting Location Flat Metal Surface Any Location
Field Tunable No
LPU-SH
LPU-C Return Loss
LPU-C

Click Here for a PDF Product Sheet